REMEHA iSense Pro DIN AD280, Инструкция по установке и обслуживанию

Страница: 22 / 64

a
Heating pump circuit C
z
Heating circuit C
Earth the various pumps and 3-way valves.
Settings to be made for this type of installation
Parameters
Access Settings to be made See chapter
INSTALLATION
Installer level
#SYSTEM
menu
EXTENDED
¼ "Displaying the parameters
in extended mode", page 33
CIRC.CURVE B
Installer level
#SECONDARY INSTAL.P
menu
To be customised
¼ "Setting the heating curve",
page 37
MAX. CIRC. B
Installer level
#SECONDARY LIMITS
menu
To be customised
¼ "Professional settings",
page 40
If circuit C is a direct circuit
without a flow sensor:
CIRC. C:
(1)
Installer level
#SYSTEM
menu
DIRECT
¼ "Setting the parameters
specific to the installation", page
34
CIRC.CURVE C
Installer level
#SECONDARY INSTAL.P
menu
To be customised
¼ "Setting the heating curve",
page 37
(1) The parameter is only displayed if
INSTALLATION
parameter is set to
EXTENDED
.
4.4.6. Hot water storage tank connection
n
QUADRO DU storage tank
In this installation example, the storage tank (type QUADRO DU)
incorporates a domestic hot water zone. The boiler starts up
systematically to maintain the domestic hot water zone in the storage
tank or to maintain the independent tank at temperature.
4. Installation iSense Pro DIN - AD280
21 12/04/2011 - 300025649-001-B