User level - #MEASURES menu
Parameter
Description
Unit
WATER TEMP.
(1)
Water temperature in the DHW tank
°C
STOR.TANK.TEMP
(1)
Water temperature in the storage tank
°C
SWIMMING P.T.B
(1)
Water temperature of the swimming pool on circuit B
°C
SWIMMING P.T.C
(1)
Water temperature of the swimming pool on circuit C
°C
OUTLET TEMP. B
(1)
Temperature of the flow water in circuit B
°C
OUTLET TEMP. C
(1)
Temperature of the flow water in circuit C
°C
SYSTEM TEMP.
(1)
Temperature of the system flow water if multi-generator
°C
T.DHW BOTTOM
(1)
Water temperature in the bottom of the DHW tank
°C
TEMP.TANK AUX
(1)
Water temperature in the second DHW tank connected to the AUX circuit °C
IN 0-10V
(1)
Voltage at input 0-10 V
V
DIN CTRL
Software control number
(1) The parameter is only displayed for the options, circuits or sensors actually connected.
5.5
Settings after powering up for the first time
5.5.1.
Displaying the parameters in extended
mode
The display mode on the control panel is set as standard in such a
way as only to show the conventional parameters. It is possible to
switch to extended mode by proceeding as follows:
1. Access the installer level: Press key
-
for around 5 seconds.
2. Select the menu
#SYSTEM
.
4
Turn the rotary button to scroll through the menus or
modify a value.
4
Press the rotary button to access the menu selected
or confirm a value modification.
¼
For a detailed explanation of menu browsing, refer
to the chapter: "Browsing in the menus", page 31
3. Set parameter
INSTALLATION
to
EXTENDED
.
Installer level - Menu #SYSTEM
Parameter
Adjustment range Description
Factory setting Customer setting
INSTALLATION CLASSIC
Displays the parameters of a conventional
installation
CLASSIC
EXTENDED
Displays all parameters
1
1
2
2
r
c
STD
(
'
t
v
0
2
4
6
8
10
12
14
16
18
22
24
20
p
b
AUTO
x c
r
j
M
g
m
SUNDAY 11:45
5"
TEMP.: 68°
C002235-F-04
5. Operating the appliance
iSense Pro DIN - AD280
33
12/04/2011 - 300025649-001-B
