REMEHA 1000 Indirect, Руководство по установке

Страница: 22 / 56

Figure 7: Siting the unit
#
Access to associated controls and immersion heaters must be available for the servicing and maintenance of the system. Where these
controls are installed against a wall a minimum distance of 600mm must be left.
#
Ensure that the floor area for the cylinder is level and capable of permanently supporting the weight when full of water (see table 2 for
weights).
5.4 Transport
Prior to installation the unit should be stored and transported in an area free from excessive damp or humidity.
To aid installation, the water heater (800ltr upwards) is provided with lifting points located at the top of the unit. To access the lifting eyes please
remove the "hot outlet" grommett followed by the cylinder lid.
Figure 8: Lifting the unit
page 11