REMEHA 1000 Indirect, Руководство по установке

Страница: 55 / 56

page 31
Guarantee
Guarantee Terms
Remeha guarantees the water heater cylinder against faulty manufacture or materials for a period of two years from the date of purchase
including parts and labour. This two year guarantee is extended to five years for the cold water control valve and to 25 years (from the date of
installation) for the stainless steel inner vessel.
These guarantees are valid provided that:
#
The water heater has been installed by a competent engineer and as per the instructions contained in the installation manual and all
relevant Codes of Practice and Regulations in force at the time of installation.
#
Any disinfection has been carried out in accordance with BS EN 806
#
Should the factory fitted temperature and pressure relief valve be tampered with or removed your guarantee will be invalidated.
#
The water heater has not been modified in anyway other than by Remeha approved engineers.
#
The water heater has only been used for the storage of wholesome sanitary water (max 250mg/l chloride).
#
Only stainless steel dummy plugs are to be used.
#
The water heater has not been subjected to excessive pressure beyond the guidelines detailed in the installation instructions.
#
The water heater has not been subjected to frost, nor has it been tampered with or been subject to misuse or neglect.
#
No factory fitted parts have been removed for unauthorised repair or replacement
#
Regular maintenance has been carried out by a competent person in accordance with the requirements set in the maintenance section of
the installation manual and any replacement parts used should be approved spare parts.
#
The guarantee is not valid outside of the United Kingdom.
The warranty does NOT cover:
Consequential damages or profit loss which may arise from a defect. Warranty claims have no delaying effect on the payment dates and other
demands
Your Remeha warranty covers you for a equivalent replacement and labour in the event that the unit fails prematurely as a result of a proved
manufacturing defect.
In order that this can be achieved, full access for removal and the replacement of the unit is essential. If it is found that access can not be
achieved the warranty will be limited to the replacement of the unit only and subsequent labour charges would not be met under the warranty.
Remeha Commercial
Tel: 0118 978 3434