ENGLISH
18
3.3.2 Delay
The Delay effect produces a delayed copy of the original source signal and adds it to the original signal.
Level Depth
Adjusts the ratio between effect signal and original signal.
On the Effect Display -38- this will be shown as Dry & Wet.
0% stands for no effect.
100% stands for maximum effect setting.
Time Encoder
Steplessly adjusts the time lag in milliseconds.
If you press and hold the Time Encoder, steps of 10 milliseconds will be carried out.
(2 ms – 4,000 ms)
Time Bar Buttons
Gradually adjust the time lag of a pass.
1-4; 1-2; 3-4; 1-1; 2-1; 4-1.
3.3.3 Echo
The Echo effect produces several copies of the original source signal and adds them to the original signal.
Level Depth
Adjusts the ratio between effect signal and original signal.
On the Effect Display -38- this will be shown as Dry & Wet.
0% stands for no effect.
100% stands for maximum effect setting.
Time Encoder
Steplessly adjusts the time lag in milliseconds.
If you press and hold the Time Encoder, steps of 10 milliseconds will be carried out.
(2 ms – 4,000 ms)
Time Bar Buttons
Gradually adjust the time lag.
1-4; 1-2; 3-4;1-1;2-1;4-1.
3.3.4 Reverb
The Reverb effect produces a stereophonic sound. The original sound seems to move away from the listener.
Level Depth
Steplessly adjusts the ratio between effect signal and original signal.
On the Effect Display -38- this will be shown as Dry & Wet.
0% stands for no effect.
100% stands for maximum effect setting.
Time Encoder
Adjusts the time lag, namely the virtual room‘s size in steps of 1.
If you press and hold the Time Encoder, steps of 10 will be carried out (1-100).
Time Bar Buttons
Gradually adjust the time lag, namely the virtual room‘s size.
0; 25; 50; 75; 90; 100.
3.3.5 Transformer
The Transformer rhythmically fades the signal in and out.
Level Depth
Steplessly adjusts the ratio between effect signal and original signal.
On the Effect Display -38- this will be shown as Dry & Wet.
0% stands for no effect.
100% stands for maximum effect setting.
Time Encoder
Steplessly adjusts the time lag between Fade In – Fade Out in milliseconds.
If you press and hold the Time Encoder, steps of 10 milliseconds will be carried out. (25 ms – 16,000 ms)
Time Bar Buttons
Gradually adjust the time lag between Fade In and Fade Out.
1-8; 1-4; 1-2; 1-1; 2-1; 4-1.
3.3.6 Pitch Shift
The Pitch Shift effect manipulates the original signal‘s tone pitch.
Level Depth
Not available. The effect always works at a 100%.
Time Encoder
Steplessly adjusts the pitch. When turning clockwise, the signal‘s pitch will sound higher. When turning counter-clockwise, the signal‘s pitch will
sound lower. By pressing the BeatFX Select Switch-30-, the effect will be reset.
Time Bar Buttons
Gradually adjust the pitch. Button 1-1 means no pitch. Buttons with higher values make the signal sound higher, buttons with lower values let the
signal sound lower.
3.3.7 Loop Roll
The Loop Roll effect repeats the original signal in the selected length and adds it to the original signal.
Level Depth
Adjusts the ratio between effect signal and original signal.
On the Effect Display -38- this will be shown as Dry & Wet.
0% stands for no effect.
100% stands for maximum effect setting.
IM_RMX90-DVS_en.indd 18
21.12.2016 09:47:59
