Reisinger S 3000, Руководство по эксплуатации

Страница: 10 / 20

-
10 –
9.2 Explanations regarding parameter list
Time
The time the door remains in OPEN position; unit seconds.
Width
The width is the travel path of the door from CLOSE position to OPEN position; unit millimeters.
Running-in zone
The driving unit has two running -in zones – one before reaching the CLOSE position and one before reaching the OPEN
position.
In the running-in zones, the driving unit slowly travels into its limit positions; unit millimeters.
Speed
Speed is the travelling speed of the door in OPEN or CLOSE direction; no unit; 255
≈
100%; (standard approx. 520 mm/s)
Reversing sensitivity
The reversing sensitivity is a central protective function. It defines the re versing point of the driving unit where the travelling
direction is reversed when running into an obstacle;
No unit – small values signify high sensitivity, great values signify low sensitivity.
Slope
Slope means the smooth starting or slowing down of the driving mechanism . No unit – small values signify a steep slope
(i.e. jerky start), great values signify a gentle slope (i.e. smooth start
).
9.2.1 Description
Parameter 1 : Open time in seconds for partial opening
Parameter 2 : Open time in seconds for complete opening 1
Parameter 3 : Open time in seconds for motion sensor Inside
Parameter 4 : Open time in seconds for motion sensor Outside
Parameter 5 : Open time in seconds after reversing
Parameter 6 : Open time in seconds for complete opening 2
Parameter 7 : Delay time until activation of electrical lock
Parameter 8: Automatic start
0 – door starts after actuation of key
1 – door starts automatically
Parameter 9 : Password protection of terminal. The 00000 value deacti vates the password protection
Parameter 10 : Opening width in millimeters for permanent opening
Parameter 11 : Opening width in millimeters for partial opening
Parameter 12 : Opening width in millimeters for complete opening 1
Parameter 13 : Opening width in millimeters for motion sensor
Inside
Par ameter 14 : Opening width in millimeters for motion sensor
Outside
Parameter 15 : Opening width in millimeters for permanent partial opening
Parameter 16 : Opening width in millimeters for complete opening 2
Parameter 17 : Running-in zone in millimeters for limit position
OPEN
Parameter 18 : Running-in zone in millimeters for limit position
CLOSE
Parameter 19: Safe distance in millimeters between trolley and end buffer of driving unit
Parameter 20: Braking distance before reaching limit position
CLOSE