51/05
- 11 –
In case in any change in speed, a new teach-in run must be carried out !
Parameter 21 :
Travelling speed in
OPEN
direction. The parameter value should be between 100 and 150. This
means a speed of approx. 520 mm/s, depending on the door weight.
In case of any change in
speed, a new teach-in run must be carried out!
Parameter 22 :
Travelling speed in CLOSE direction. The parameter value should be between 60 and 90. This means
a speed of approx. 320 mm/s, depending on the door weight.
In case of any change in speed, a
new teach-in run must be carried out!
Parameter 23 :
Travelling speed to the OPEN/CLOSE limit positions. The parameter value should be between 30 and
45. This means a speed of approx. 50 mm/s, depending on the door weight.
In case of any change
in speed, a new teach-in run must be carried out!
Parameter 24 :
Travelling speed during teach-in run. The parameter value should be between 40 and 45. This means
a speed of approx. 100 mm/s, depending on the door weight.
In case of any change in speed, a
new teach-in run must be carried out!
Parameter 31:
Reversing sensitivity of the driving unit in OPEN direction when running into an obstacle. The works
setting of the parameter value is 100. It should only be modified
with care
! Smaller values signify a
higher sensitivity, greater values signify a lower sensitivity. In case of very small values, there is the
risk of the door not properly closing any longer – in case of very great values there is an
increased
risk of injury
.
Parameter 32:
Reversing sensitivity of the driving unit in CLOSE direction when running into an obstacle. The works
setting of the parameter value is 100. It should only be modified
with care
! Smaller values signify a
higher sensitivity, greater values signify a lower sensitivity. In case of very small values, there is the
risk of the door not closing properly any longer – in case of very great values, there is an
increased
risk of injury
.
Parameter 33:
The acceleration slope ensures a smooth starting of the door without any jerks. The works setting of
the parameter value is 400. It should only be modified
with care
! Smaller values signify a steeper
slope, i.e. the door is accelerated faster, greater values signify a more gentle slope, i.e. the door is
accelerated less fast.
Attention
! This parameter affects the service life of the driving mechanism on a
long-term basis. Very small values may reduce the service life of the driving mechanism.
In case of
any change in the acceleration slope, a new teach-in run must be carried out!
Parameter 34:
The braking slope OPEN ensures a fast slowing-down of the door in OPEN direction without any
jerks. The works setting of the parameter value is 4. It should only be modified
with care
! Smaller
values signify a steeper slope, i.e. the door is slowed down faster, greater values signify a more gen-
tle slope, i.e. the door is slowed down less fast.
Attention
! This parameter affects the service life of
the driving mechanism on a long-term basis. Very small values may reduce the service life of the driv-
ing mechanism.
In case of any change in the braking slope, a new teach-in run must be carried
out!
Parameter 35:
The braking slope CLOSE ensures a fast slowing-down of the door in CLOSE direction without any
jerks. The works setting of the parameter value is 4. It should only be modified
with care
! Smaller
values signify a steeper slope, i.e. the door is slowed down faster, greater values signify a more gen-
tle slope, i.e. the door is slowed down less fast.
Attention
! This parameter affects the service life of
the driving mechanism on a long-term basis. Very small values may reduce the service life of the driv-
ing mechanism.
In case of any change in the braking slope, a new teach-in run must be carried
out!
Parameter 36 :
Number of reversings in case of obstacle on travel path
Parameter 40:
Language option for terminal and RS232 edition:
1 -- German
2 -- English
Parameter 41:
Actual date
Parameter 42:
Actual time
Parameter 43:
Summertime
Parameter 50:
Teach-in run is started
Содержание S 3000
