Reinhardt System MWS 10 страница 7 Скачать руководство пользователя

Страница: 7 / 87

REINHARDT

System- und Messelectronic GmbH

Bergstr. 33 86911 Diessen-Obermühlhausen Postfach 12 41 D-86908 Diessen Tel. 08196 - 934100

MWS_55_e.indb Page 7

geändert am 26.10.2017 von DO

Manual MWS 55 / MWS 88 / MWS 10 and Sensors 55

to table of contents

1 Caution

1.1 Intended Use

REINHARDT-Weather stations MWS 55, MWS 88 and MWS 10 and Sensors 55 (hereinafter

referred to as MWS 55) are exclusively built for stationary operation on a fixed 1" pipe for auto-

matically collecting climatic parameters outside.

Any use other than described above may cause damage of the product or lead to other dangers.

Do not mount the weather station in reach of children and pets.

Carefully read the complete operating manual. It contains important information about the in-

stallation and operation.

If the MWS 55 is not used for a longer period of time you should store it lying to prevent escaping

the lubricant from the ball bearings!

1.2 Safety Regulations

The instruments are manufactured according to modern technical standards and can be operated

without danger when used as directed.

Damage caused by non-observance of this operating manual can lead to forfeiture of warranty.

We shall not assume any liability for subsequent damage.

We shall not assume any liability for damage of items or persons caused by improper handling

or non-observance of the safety instructions! In such cases any guarantee claims shall become

null and void.

Dear customer, the following safety and hazard notices not only serve the protection of your health

but also the protection of the appliance. Please read the following points carefully.

The

supply voltage

is converted by isolated transformers into voltages of maximum 24VDC.

(The stations can be operated at voltages up to 28VDC).

Please do only use the supplied power supply units.

The weather station includes pointed and sharp-edged parts (i.e. windvane and edges of the

sensor's housing), which may cause injuries when handled without care.

Do not leave the packaging material lying around. These parts are dangerous toys in the hands

of children.

Handle the product with care. Blows or impact, or dropping it even from a small heigth will da-

mage it.

1.3 Mounting

The weather station is mounted on a 1" water-pipe. This pipe must be fixed very well to stand

high wind speeds above 200 km/h when the weather station is mounted.

The weather station is to be fixed well onto the 1" pipe with the screws. The stability of the weather

station on the pipe must be established. Really check this after mounting the weather station!

Please mount the weather station on a place you easy can reach for maintenance pur-

poses for the station can not be guaranteed to be absolutely maintenance free, i.e. the

precipitaion sensor needs to be cleaned regularly (MWS10)!!!!

You'll also find advice for mounting the weather station on your Weather-USB-Stick.

Содержание MWS 10
























































































Результаты поиска

Содержание MWS 10

Отзывы:

Похожие инструкции для MWS 10

Бренды по названию

Популярные бренды

Reinhardt System MWS 10, Руководство пользователя

Результаты поиска

Содержание MWS 10

Отзывы:

Похожие инструкции для MWS 10

Бренды по названию

Популярные бренды