Reinhardt System MWS 10 страница 13 Скачать руководство пользователя

Страница: 13 / 87

REINHARDT

System- und Messelectronic GmbH

Bergstr. 33 86911 Diessen-Obermühlhausen Postfach 12 41 D-86908 Diessen Tel. 08196 - 934100

MWS_55_e.indb Page 13

geändert am 26.10.2017 von DO

Manual MWS 55 / MWS 88 / MWS 10 and Sensors 55

to table of contents

3.4 The sensors

3.4.1 The Temperature Sensor

Temperature measurement is based on a precision precalibrated sensor SHT25 from Sensirion.

The values are read internally via a I²C bus. The resulting measured value is additionally linea-

rised by the weather station.

By standard, the tem per ature sensor is mounted on the lower side of the weather station. A white

lacquered pagoda protects against radiation and prevents a buildup of heat.

Range: from -40 °C to + 60 °C, measuring accuracy ± 0.3 °C, (display also possible in Kelvin or

°Fah ren heit)

CAUTION: Compared to temperature measurements in big shielded cabins the measured values

can be higher when the sun is shining. If the temperature measurements must correlate with the

measurements in big shielded cabins you should measure temperature in the shadow or measure

with an additional temperature sensor placed in the shadow or in a big shielded cabin!

Unit: [°C]

3.4.2 The Humidity Sensor

is also based on a precision precalibrated sensor SHT25 from Sensirion. The values are read in-

ternally via a I²C bus. The resulting measured value is additionally linearised and compensated

by the weather station. The sensor is also mount ed on the lower side of the weather station. A

Gore-Tex cover protects it from pollution or destruction by dust or insects.

The humidity sensor can be used in a tem perature range be tween -40 °C to + 60 °C. It is linearized

to an accuracy of 2 %.

Range: from 10 to 100 %, measuring accuracy ±2 %, display also as dewpoint meas ure ment in

°C or °F

NOTE

This sensor is very responsive to static charge and air pollution (dust, aggressive gases, but also salt).

Please note that under unfavourable conditions (i.e. microbic stress caused by moulds, bacteria)

this sensor ages faster than under normal conditions.

Unit: [%]

3.4.3 The Pressure Sensor

is a precalibrated digital sensor from Bosch (BMP180/BMP280) which is read internally via a I²C

bus. This sensor already is linearized to 4 hPa for the whole temperature range, the barometer is

temperature compensated. Another temperature linearisation reduces the deviation to less than

2 hPa over the whole temperature range.

The sensor can be used in the temperature range of -40 °C to + 60 °C.

Measuring range: from 300 hPa to 1100 hPa with ± 0.8 hPa accuracy. Display can be reduced to

0 m above sea level (input of the local altitude in [m], display also in mm mercury column or Inch

mercury column).

An additional output of barometric pressure (reduced to sea level) is possible. 3 different formulas

are predefined within the weather station (simple formula, international barometric formula and

barometric formula of DWD considering temperature and humidity).

Further formulas you may use within the weather32 software.

This sensor can be transported by air cargo!

Unit: [hPa]

Содержание MWS 10
























































































Результаты поиска

Содержание MWS 10

Отзывы:

Похожие инструкции для MWS 10

Бренды по названию

Популярные бренды

Reinhardt System MWS 10, Руководство пользователя

Результаты поиска

Содержание MWS 10

Отзывы:

Похожие инструкции для MWS 10

Бренды по названию

Популярные бренды