36
Special functions
R
el
ay
fu
nc
tion
s
Relay is always switched on.
6.5.13. - Always on
Heat circuit pump is controlled with a fixed hysteresis of (+/-1 °C for setpoint
temperature). 30 seconds Switch on and Switch off delay is fixed setting to
prevent unnecessary switching of the pump. RC21 room controller can be used
as room temperature sensor.
6.5.14.2. - Desired temperature - day (Room set day)
Room reference temperature in day mode. If this temperature is exceeded at
the room temperature sensor at the set times, the relay is switched off.
6.5.14.3. - Desired temperature - night (Room set night)
Room reference temperature in night mode. If this temperature is exceeded at
the room temperature sensor at the set times, the relay is switched off.
6.5.14.4. - Room sensor
This menu determines the sensor for the room temperature.
6.5.14.5. - Periods
Set the desired periods of time when the heat circuit day mode should be
active. 3 periods can be set per day, settings can also be copied to other days.
Outside the set times the heating function is working in night mode.
6.5.14. - Heating circuit
The relay is switched on at the same time as the set relay R1 or R2.
6.5.12.2. - Delay
This menu determines how long after the start of R1 or R2 the parallel relay is
switched on.
6.5.12.3. - Followup time
This menu determines how long after the switch off of R1 or R2 the parallel
relay is switched off.
6.5.12. -
SParallel operation R (X)
