15
E.2 Commissioning help – Setup wizard
Operation
The first time the controller is turned on, language and
clock need to be set.
After that a query appears as to whether you want to
parameterize the controller using the Setup wizard or
not. The Setup wizard can also be terminated or called
up again at any time in the special functions menu.
The Setup wizard guides you through the necessary
basic settings in the correct order, and provides brief
descriptions of each parameter in the display.
Pressing the “esc” key takes you back to the previous
value so you can look at the selected setting again
or adjust it if desired. Pressing the “esc“ more than once takes you back step by step to the
selection mode, thus cancelling the Setup wizard. Finally, menu 3.2 under operating mode
“Manual” should be used to test the switch outputs with the solar consumers connected, and to
check the sensor values for plausibility. Then switch on automatic mode.
If you decide not to use the commissioning help, you should make the necessary settings in the
following sequence:
• Menu 9. Language
• Menu 6.11 Time and date
• Menu 6.1 Program selection
• Menu 4 Settings, all values
• Menu 5 Protective functions if modifications are necessary
• Menu 6 Special functions if additional changes are necessary
Note:
Setup wizard can be called up any time from the menu 6.8.
Finally, menu 3.2 under operating mode “Manual“ should be used to test the switch outputs
with the consumers connected, and to check the sensor values for plausibility. Then switch on
automatic mode.
auxiliary
heating
E.3 Free commissioning
Caution
Observe the explanations for the individual parameters on the following pages,
and check whether further settings are necessary for your application.
