Regency Fireplace Products CB40EPV-LP, Инструкция для владельца и по установке

Страница: 65 / 124

City Series CB40EPV
|
65
installation
Horizontal Terminations - End of Line Power Vent
Rigid Pipe 4" x 6-5/8"
The minimum components required for a basic horizontal termination
are:
1 Power Vent Kit
1 Rigid Pipe Adaptor
1 Length of pipe to suit wall thickness and total vent run
(see Table 1)
Wall thickness is measured from the back standoffs to the inside mounting
surface of termination cap. Create a level surface to mount the vent terminal.
The Terminal must not be recessed into siding. Measure the wall thickness.
Flat Wall Installation
Wall Thickness
(inches)
Vent Length Required
(inches)
4" (102 mm) - 5-1/2" (140 mm) 6" (152 mm)
7" (178 mm) - 8-1/2" (216 mm) 9" (229 mm)
10" (254 mm) - 11-1/2" (292 mm) 12" (305 mm)
9" (229 mm) - 14-1/2" (368 mm) 11" (279 mm) - 14-5/8" (371 mm)
Adj. Pipe
15" (381 mm) - 23-1/2" (597 mm) 17" (432 mm) - 24" (610 mm)
Adj. Pipe
Pipe Length
Vertical Terminal
Storm Collar
Flashing
Ceiling Firestop
Adj.Pipe Length
Wall Thimble
Rigid Pipe Adapter
(Part # 510-994)
o 90 Elbow
Pipe Length
Power Vent Trim
Power Vent Terminal
Frame Assembly
Power Vent Frame
Power Vent Kit
(Part # 946-535)
Table 1
Power Vent Kit with Vent Terminal
1 510-994 Rigid Pipe Adaptor Sold separately
946-535 Power Vent Kit- includes: Frame,
Frame Assembly, Vent Trim, Fan,
and Terminal Sold separately
1 911-250/P 45' (13.72 m)-5 Wire BX Cable or Sold separately
1 911-251/P 90' (27.43 m)-5-Wire BX Cable Sold separately
Amount required
for install 4" x 6-5/8" (102 mm x 168 mm)
Rigid Pipe Sold separately
NOTE: *Slip section is mandatory.