Regency Fireplace Products C34 Classic, Инструкция для владельца и по установке

Страница: 42 / 60

42
| Regency
®
CLASSIC™ C34-11 Direct Vent Freestanding Gas Stove
|
42
installation
WIRING DIAGRAM
This heater does not require a 120V A.C. supply
for operation. In case of a power failure, the
burner switch and the optional remote control/
thermostat will continue to operate.
However, a 120V A.C. power supply is needed
for the optional fan/blower operation.
CAUTION: Ensure that the wires
do not touch a hot surface and
are away from sharp edges.
WARNING:
Electrical Grounding
Instructions
This appliance is equipped
with a three pronged (ground -
ing) plug for your protection
against shock hazard and
should be plugged directly into
a properly grounded three-
prong receptacle. Do not cut or
remove the grounding prong
from this plug.
Note: If optional fan is not purchased, Batter -
ies are required in both remote receiver (4 x
AA Batteries) & remote hand held ( 3 x AAA
batteries) in order to operate appliance using
the remote control.