Controller
Fillcontrol Auto Make-up and degassing — 06.07.2016 - Rev. B
English — 39
9
Controller
9.1
Operator panel
1
Manual
•
For tests and maintenance tasks
•
The Manual LED illuminates green in manual mode
8
OK
•
Confirm actions
2
Stop
•
For commissioning and entry of new values in the
controller
•
The Stop LED illuminates green in stop mode
9
Error LED
•
The Error LED illuminates in the event of a fault
3
Auto (continuous operation)
•
The Auto LED illuminates green in Automatic mode
•
The Auto LED flashes green in Manual mode
•
The Auto LED is not illuminated when the system is
stopped
10
Pump
•
The Pump LED illuminates green during pump
operation
4
Menu
•
Call up the Customer menu
11
Pump
•
The Pump LED illuminates green during pump
operation
5
"Forward" to the next menu
12
Motor ball valve
•
The motor ball valve LED illuminates during
adjustment
6
"Back" to the previous menu
13
Display
•
Two lines
7
Quit
•
Acknowledge messages
Selecting and changing parameters
1. Use "OK" (8) to select the parameter.
2. Use the arrow buttons (5) or (6) to change the parameter value.
3. Use "OK" (8) to confirm the parameter.
4. Use the arrow buttons (5) or (6) to change the menu option.
5. Use "Quit" (7) to switch to a different menu level.
