Reflex Marine FROG-9, Руководство пользователя

Страница: 33 / 64

User Manual FROG-9
Rev 05 Page33
11. Load Test Plate
Check the date of the last load test to ensure the unit will
remain in compliance with requirements for at least 6
months.
12. Lifting Sling Set (Critical Part)
The lifting sling set (including attachments) must be
visually examined by a Competent Person.
Note: High visibility cover must be completely removed
to allow inspection of steel wire rope components.
Replace the sling set according to the usage of the FROG
(see Table 3 in
Section 6.3 ). This may be as frequently as
every 3 months. Irrespective of apparent condition the
lifting sling set should be replaced at least every 12
months.
Note serial number and
test date stamp (specify
decision to retain or
replace).
13. Storage of FROG
Check the storage cover is in good condition and not
showing any signs of UV degradation.
14. Storage of Sling Sets (active and spares)
Sling sets should be stored in an appropriate dry place
without high visibility cover fitted.
15. Photographic Report
As an inspection record aid, the critical elements and
condition of the unit may be recorded in photographs;
Photographs of each of the 14 points of the check list
would provide a concise inspection record. Photographs
should be clearly marked pre and post inspection as
appropriate.
16. Documentation / Report
Complete an inspection report on the above which must
be signed and dated by a Competent Person.
Order required spares in time for next inspection.
Reflex Marine Ltd offer to keep an archive copy of your
inspection records against the unit number. You can
submit your completed checklists and photographs on
www.reflexmarine.com/support .
NOTES:
Inspected by
Position/ Company
Signature
Original Inspection record filed in
Inspection record copied to
Inspection record copied to
Inspection record copied to Reflex Marine Ltd (optional archive of unit history).
Link to Index