Reflex Marine FROG-9, Руководство пользователя

Страница: 42 / 64

User Manual FROG-9
Rev 05 Page42
6.8.1 Load Test Procedure
Table 4 details the required proof load tests that are applicable to the FROG-9. Following the load
tests, a post load test visual inspection should be conducted as recommended in
Section 6.7 .
Table 4: Proof Load Tests – FROG-9
Load Test
Number
1 2 3
Components
Under Test i. Main Lift-Eye.
ii. Central Column
Load
Bearing
Assembly.
iii. Seats and Floor
Structure.
i. Back-Up Lift-Eye.
ii. Central Column
Load Bearing
Assembly.
iii. Seats and Floor
Structure.
i. Handling Lift-Eye
Test Proof Load 2900 kg (6393 lb) 2900 kg (6393 lb) 1100 kg (2425 lb)
Test Proof Load
Distribution 1800 kg (3968 lb) on the
seats and spread equally
between them.
1100 kg (2425 lb) placed
on
the floor and
distributed evenly.
1800 kg (3968 lb) on the
seats and spread equally
between them.
1100 kg (2425 lb) placed
on
the floor and
distributed evenly.
1100 kg (2425 lb) should
be distributed evenly on
the floor.
Basis of Test
Proof Load Twice Maximum Gross
Weight,
less Tare
Weight*
= 2 x 2000 kg
– 1100 kg =
2900 kg
Twice Maximum Gross
Weight,
less Tare
Weight*
= 2 x 2000 kg
– 1100 kg =
2900 kg
Twice Tare weight*, less
Tare weight*
= 2 x 1100 kg
– 1100 kg =
1100 kg
Crane Hook
Load 4000 kg 4000 kg 2200 kg
Test Method Lift the unit and hold
static for 3 minutes. Lift the unit and hold
static for 3 minutes. Lift the unit and hold
static for 3 minutes.
*
Note: The Tare Weight of the FROG-9 is approximately 1100 kg but may vary slightly. Each FROG-9 must be weighed
prior to load test.
6.8.2 Test Plate
A test plate will be issued and attached by the test house, which should show:
i. Tare Weight (kg).
ii. Pay load / SWL (kg).
iii. Maximum gross load (kg).
iv. The load test date.
v. Test load (kg).
vi. The serial number of the FROG-9: HC9-XXX (where XXX is unit I.D. No).
vii. The model number of the FROG-9: HC9-01.
Link to Index