www.reechcraft.com/powerlift
888-600-6160
29
SECTI
ON
3
MACHINE OPERATION
General
When the platform reaches the bottom of its travel, the overload clutch
creates a ratcheting or buzzing noise, indicating that the machine has
reached the fully lowered position.
BE SURE TO MAINTAIN A FIRM GRIP ON THE DRILL AT ALL TIMES DURING
OPERATION.
The machine is fitted with a drive shaft brake to prevent motion of the
platform not initiated by the operator.
Before operating the machine, be sure the platform is fully lowered and
all four (4) outriggers are properly installed (See Figure 3-3). Be sure the
machine is level and on a surface capable of supporting the intended load.
IN THE EVENT THAT THE CLIMBING UNIT FAILS TO ELEVATE AFTER THE
OUTRIGGERS HAVE BEEN PROPERLY INSTALLED AND STABILIZED, THE
MACHINE IS NOT WORKING PROPERLY AND MUST NOT BE USED UNTIL
IT IS INSPECTED AND REPAIRED BY A QUALIFIED PERSON.
NOTE:
Do not attempt to enter or exit the platform unless it is fully
lowered.
3.3
Machine Operation
DANGER
NOTICE
CAUTION
WARNING
DANGER
NOTICE
CAUTION
WARNING
www.industrialproducts.com | [email protected] | 888-243-3339
