www.reechcraft.com/powerlift
888-600-6160
49
SECTI
ON
6
SERVICE & MAINTENANCE
General
This section provides the necessary information needed by those personnel
that are responsible to place the machine in operational readiness and
maintain its safe operating condition. To ensure maximum service life and safe
operation, be sure that all inspections and maintenance has been completed
before placing the machine into service.
Preparation, Inspection and Maintenance
It is important to establish a comprehensive inspection and preventative
maintenance program. Table 2-1 outlines the periodic machine inspection
and maintenance recommended by ReechCraft. Consult your local, regional
or national regulations for further requirements. Note: the frequency of
inspections must increase as environment and frequency of use requires.
Pre-Start Inspection
It is the operators responsibility to perform a Pre-Start Inspection of the
machine prior to use. Reference Section 2 in this manual for Pre-Start
Inspection procedures.
This manual must be read and understood in its entirety prior to performing a
Pre-Start Inspection.
Frequent and Pre-Delivery Inspection
The Frequent Inspection and Pre-Delivery Inspection shall be performed by a
competent person or a qualified mechanic.
The Frequent Inspection and Pre-Delivery Inspection procedures are performed
in the same way but at different times. The Pre-Delivery Inspection shall be
performed prior to each sale, lease, or rental delivery. The Frequent Inspection
shall be performed on each machine in service for 3 months; out of service for
more than 3 months; or when purchased used. The frequency of this inspection
must increase as environment and frequency of use requires.
Reference the appropriate areas of this manual for service and maintenance
procedures.
6.2
Machine Preparation, Inspection & Maintenance
www.industrialproducts.com | [email protected] | 888-243-3339
