Redmond RMC-M4500E, Руководство пользователя, Страница: 18 / 48

18
default for each programme. Setting interval and range of cooking
time settings depend on the programme of cooking chosen.
1. Select the cooking programme. Press “Hour” button repeatedly to adjust the hours. Press
“Min” button repeatedlyto adjust the minutes. To scroll through the digits, press and hold
the corresponding button down.
2. To set the cooking time of less than one hour, repeatedly press the “Hour” button to zero
the hour settings and set the minutes using the “Min” button.
3. When the time is set (display keeps blinking), proceed to the next stage, in accordance
with the cooking programme chosen. Press “Reheat/Cancel” button to cancel all settings
and reset.
IMPORTANT! For your convenience, the cooking time range in all programmes starts with the
minimum setting, enabling you to prolong the cooking time if the dish comes out undercooked.
In “STEAM”, “SOUP”, “PILAF” programmes the countdown begins onlywhen the device reaches
its operating temperature. E. g. the countdown ofthe “STEAM” programme begins only when the
water comes to a full boil, providing enough steam.
Preset Function
Preset function allows setting the programme to be finished by certain time. Setting the time
of a delay, take the cooking time of the programme into con sideration. Time settings range
from 1 to 24 hours with 10 minute intervals.
1. Press “Menu” button to select the cooking programme.
2. Press “Time Delay” button to set the time of a delay. “Time Delay” indicator lights up and
the timer starts blinking.
3. Use “Hour” button to set the hours in 24-hour format and “Min” button to set the minutes.
To scroll through the digits press and hold the correspond ing button down.
4. To set the cooking time of less than one hour repeatedlypress “Hour” button to zero the
hour settings and set the minutes using the “Min” button.
5. Press “Reheat/Cancel” button to cancel the settings and reset.
6. When the time of a delayis set, press “Start” button. Corresponding indica tor lights up and
the countdown begins. The dish will be ready when the time set expires.
Ifthe time ofa delayis less or equal to the cooking time ofthe programme,the cooking process
will begin right after you press “Start”.
Preset function is available in all cooking programmes except “FRY”.
It is not recommended to set Preset function if various dairy and perishable products are being
used (eggs, fresh milk, meat, cheese, etc.).
Setting the Preset function remember that the countdown in “STEAM”, “SOUP” and “BOIL”
programmes begins only after the device reaches its operating temperature.
Keep Warm Function
Keep Warm function is being activated automatically at the end of the cooking programme.
It allows maintaining the temperature of 70-75°C for a period of time up to 24 hours. “Reheat/
Cancel” button indicator lights up and Keep Warm count up is displayed. Press “Reheat/Cancel”
button to disable the function (corresponding indicators go off).
Disabling the Keep Warm in advance
Automatic activation of the Keep Warm function at the end of the programme maysometimes
be undesirable.The REDMOND RMC-M4500E multicooker allows disabling the function in
advance. To do so, press “Start” button right after the programme starts running or at any point
of its operation, Keep Warm function indicator goes off. To reactivate the function, repress the
“Start” button, Keep Warm function indicator lights up.
Reheat Function
The REDMOND RMC-M4500E multicooker may be used to reheat the cold meal.
1. Fill the bowl with ingredients and place it inside the device.
2. Close the lid until it clicks into place and plug in the unit.
3. Press “Reheat/Cancel”. Button indicator lights up and the Reheat func tion countdown is
being displayed.
4. The meal will be warmed up to 70-75°C and the temperature will be maintained for the
next 24 hours.
5. Tocancel the functionpress “Reheat/Cancel” (button indicatorgoesoff).
The function may operate for a period of 24 hours, however, we recommend using it moderately,
because a prolonged thermal exposure may affect flavor characteristics or dry out the meal.
Standard Operating Procedure for Automatic Programmes
1. Measure the ingredients according to the recipe and put them into the bowl. Make sure
that all the ingredients including liquid are below the scale mark indicating maximum
capacity.
2. Place the bowl inside the device. The bowl and the heating element must fit tightly. Close
the lid until it clicks into place. Plug in the unit.
3. Select the desired cooking programme by pressing the “Menu” button (corresponding
indicator lights up and default time for the programme is displayed).
4. Use “Hour” and “Min” buttons to adjust the time set by default for each programme.
5. Set Preset function if needed.
6. Press “Start”. “Start” button and Keep Warm function indicators light up. The pro gramme
starts running and its countdown is being displayed. Repress “Start” button to disable the
Keep Warm function (Keep Warm function indicator goes off).
7. When cooking time expires the device makes an audible sound. Depending on your settings
the device either automatically enters the Keep Warm mode (“Reheat/Cancel” button
indicator lights up, count up is displayed), or the standby mode.
8. To interrupt or to cancel the programme or to disable the Keep Warm function press
“ Reheat/Cancel”.