RED SCARLET-X страница 97 Скачать руководство пользователя

Страница: 97 / 160

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-H

MOVE THE SPOT FOCUS TARGET

Perform either of the following to move the Spot target using the touchscreen LCD:

Press and hold the touchscreen LCD on the location you want to relocate the Spot target.

Press and hold the touchscreen LCD where the Spot target currently is, and drag the Spot target.

To move the Spot target using the SIDE HANDLE or REDMOTE:
1. Go to the main screen.
2. Press the

Down Arrow

in the Navigation Group.

The Spot target line weight increases and the red cursor under Menu dims slightly.

3. Use the directional arrows to move the Spot target to the desired location.
4. Press the

Enter

button.

5. To exit, press the

Menu

button.

SIZE

Choose any of the sizes for the Spot target:

Small

Medium

Large

ENHANCED A/F

Enhanced A/F has an autofocus algorithm that offers better performance and improved visual indicators when

in Confirm mode.

ENABLE ENHANCED A/F

1. Go to

Menu

Focus

Mode

2. Select

Confirm

from the

Mode

drop-down menu.

3. Select an option from the

Zone

drop-down menu.

4. If you selected Spot from the Zone drop-down menu, select a size from the

Size

drop-down menu.

5. Select the

Enhanced A/F

check box.

6. Select the monitor that you want to dedicate to using the Enhanced A/F feature from the

Monitor

drop-down

menu:

‒

BRAIN HDMI

‒

BRAIN HD-SDI

The selected monitor will be in Clean mode (no overlay) with a set resolution of 720p and update frequency

of 60 Hz. The target does not display on the selected monitor. You will not have control over this monitor

until you disable the Enhanced A/F feature.

Содержание SCARLET-X




























































































































































Результаты поиска

Содержание SCARLET-X

Отзывы:

Похожие инструкции для SCARLET-X

Бренды по названию

Популярные бренды

RED SCARLET-X, Руководство по эксплуатации

Результаты поиска

Содержание SCARLET-X

Отзывы:

Похожие инструкции для SCARLET-X

Бренды по названию

Популярные бренды