manualshive.com logo in svg

RED SCARLET-X, Руководство по эксплуатации

Поделиться
Скачать
RED SCARLET-X Скачать руководство пользователя страница 122

COPYRIGHT © 2014 RED.COM, INC  

RED DSMC OPERATION GUIDE

   955-0020_V5.1, REV-H  

|

   122

MIC-1, MIC-2 (MICROPHONE AUDIO)

Two 3.5mm phone jacks on the front of the BRAIN support two independent channels of balanced or unbal-

anced microphone level analog audio inputs.
Nominal input impedance for each microphone jack is 2.4K ohm.

PIN

SIGNAL

DESCRIPTION 

DIRECTION

TIP

IN +

Mic Input (+48V Phantom Power)

In

RING

IN -

Mic Input (+48V Phantom Power)

In

SLEEVE

GND

Camera ground

N/A

Microphone Level analog audio input signals are routed via a high quality pre-amplifier and soft limiter, whose 

Gain may be controlled using the Input Level control to achieve the desired audio reference/recording level. 

Microphone inputs s48V @ 10mA Phantom Power as a user selectable option. 
To assist with reference level setup, the camera provides a color-coded Peak Level Meter in the Graphical User 

Interface, with witness marks that indicate 0 dBu (-20 dBFS) and 0 VU (-16 dBFS) levels.
Peak Level Meter range is –36 dBu to +20 dBu (-54 dBFS to 0 dBFS) and provides input clip indication.

NOTE: 

A pre-fabricated XLR to TRS interface cable, the XLR MICROPHONE CABLE (P/N 790-0229), is available 

from RED Digital Cinema.

Microphone Input Connector

Содержание SCARLET-X

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды