RED SCARLET-X Скачать руководство пользователя

Страница: 95 / 160

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-H

FOCUS MENU

MODE TAB

The Focus Menu is used to enable and select Focus parameters, including Mode, Zone, Size, and Enhanced

A/F.

MODE

Select one of the following from the

Mode

drop-down menu:

Manual

: When selected, all focus operations are manual.

Confirm

: Enables the Center or Spot focus target. This mode provides additional focus assistance by us-

ing red, yellow, and green color changes to the focus spot window. Inadequate subject illumination and/or

contrast may interfere with normal Focus Confirm operation.
For best results with Focus Confirm, you should “rock” the focus ring: Focus through the point of optimum

focusing and back again in decreasing amplitude, as when “zeroing-in” for precision manual focus.

AUTOFOCUS MODES (DSMC NIKON AND CANON MOUNTS)

When you have any of the following conditions, there are additional options in the Modes drop-down menu:

DSMC Nikon Mount and a supported lens is attached. The lens focus switch is set to “A” or “M/A”.

DSMC Canon Mount and a supported lens is attached. The lens focus switch is set to “AF”.

DSMC Canon MOTION MOUNT and a supported lens is attached. The lens focus switch is set to “AF”.

When any of the conditions above are met, you have the additional following options in the Modes drop-down

menu:

Single

: When you press the key mapped to AF: Start, the camera performs single-shot AF. Optimized for

rapid focus even under low-contrast conditions. Works with both Center and Spot zones.

Continuous

: When you press the key mapped to AF: Start, the camera attempts to keep objects in the target

in focus. Works best with good lighting and contrast. Works with both Center and Spot zones.

Touch Track

: Dynamically updates a positionable AF point using the touchscreen. Only works with Spot

zone. Keep Spot target on subject while moving across frame, as the lens continuously focuses on that

target.

Rack

: Enables rack focus. Only works with Spot zone. For more information about configuring rack focus,

Содержание SCARLET-X




























































































































































Результаты поиска

Содержание SCARLET-X

Отзывы:

Похожие инструкции для SCARLET-X

Бренды по названию

Популярные бренды

RED SCARLET-X, Руководство по эксплуатации

Результаты поиска

Содержание SCARLET-X

Отзывы:

Похожие инструкции для SCARLET-X

Бренды по названию

Популярные бренды