RED SCARLET-X Скачать руководство пользователя

Страница: 28 / 160

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-H

MODULE ADAPTOR

The MODULE ADAPTOR enables DSMC modules to connect the DSMC BRAIN for expandable functionality.

The MODULE ADAPTOR features additional ¼-20 mounting points on top for further add-ons and configuration

support. Most RED DSMC modules require a MODULE ADAPTOR or +1 ADAPTOR MODULE to attach to your

DSMC BRAIN.

WARNING:

MODULE ADAPTOR is NOT compatible with the +1 ADAPTOR MODULE.

WARNING:

The MODULE ADAPTOR IS NOT compatible with the +1 ADAPTOR MODULE.

+1 ADAPTOR MODULE

The +1 ADAPTOR MODULE mounts onto the back of a DSMC BRAIN and provides power and support for an

additional RED EVF/LCD. The +1 ADAPTOR MODULE also includes an AUX power port for 4-pin third party ac-

cessories. Other 2-pin accessories are also compatible when using a 4-PIN TO 2-PIN ADAPTOR CABLE.

WARNING:

The +1 ADAPTOR MODULE IS NOT compatible with the MODULE ADAPTOR.

WARNING:

DO NOT use the EVF/LCD port if a PRO I/O MODULE is connected to the DSMC BRAIN.

NOTE:

The +1 ADAPTOR MODULE requires DSMC firmware v4.0.8 or later.

MODULE ADAPTOR

+1 ADAPTOR MODULE

Содержание SCARLET-X




























































































































































Результаты поиска

Содержание SCARLET-X

Отзывы:

Похожие инструкции для SCARLET-X

Бренды по названию

Популярные бренды

RED SCARLET-X, Руководство по эксплуатации

Результаты поиска

Содержание SCARLET-X

Отзывы:

Похожие инструкции для SCARLET-X

Бренды по названию

Популярные бренды