RED RAVEN RED DRAGON 4.5K, Руководство по эксплуатации

Страница: 75 / 230

HORIZON
Displays an overlay that provides a reference to the position of the horizon. The Horizon overlay consists of two (2)
short side-bars that are always horizontally centered on the monitor, and a single longer horizon-line that adjusts to the
horizon based on the orientation of the camera.
The side-bars are green if the pitch is /– 1° of the calibrated zero position, otherwise they are red. The horizon-
line is green if the roll is /– 1° of the calibrated zero position, otherwise it is red.
To add numerical values for the pitch and roll to the Horizon overlay, follow the instructions below:
1. Go to Menu > Settings > Display > Monitor Control > Overlay .
2. Select
Create... , Clone... , or Edit... , respectively, for the desired overlay action.
3. Select a location on the interface to add the numerical data for the Horizon overlay.
4. Select Motion: Gyro Data (GYRO) from the Item drop-down menu.
5. Select the desired text size.
6. Select
Add .
7. Select Save .
8. Go to Menu > Settings > Display > Monitor Control > Monitor , and select the overlay from the Overlay drop-
down menu.
NOTE: The internal gyroscope and accelerometer must be calibrated for the Horizon overlay to function properly. For
more information, go to "Gyroscope and Accelerometer Calibration" on page 123 .
ZEBRAS
Use Zebra mode to enable and adjust the upper and lower values for two (2) independent zebra indicators. Use Zebra
1 for highlight exposure, and use Zebra 2 for mid-tones or shadows. Zebras are visible in Magnify mode and are
disabled by default.
The camera offers two (2) zebra types:
Video : IRE-based mode; evaluates based on the current ISO and Look settings, and not the RAW image.
RAW : Evaluates based on the RAW image.
For more information, see the Exposure with RED Cameras: False Color & Zebra Tools article , available at
www.red.com/learn/red-101/exposure-false-color-zebra-tools .
ENABLE ZEBRA INDICATORS
1. Go to
Menu > Settings > Display > Zebra .
2. Select a Zebra check box.
Zebra 1 :
Video : Areas of the image exposed within the IRE range are indicated by red diagonal lines at –45°. Default
is 98 to 100 IRE.
RAW : Areas of the image exposed within the range of stops are indicated by solid red. Default is 15.80 to
16.00 stops.
Zebra 2 :
Video : Areas of the image exposed within the IRE range are indicated by green diagonal lines at 45°. Default
is 41 to 48 IRE.
RAW : Areas of the image exposed within the range of stops are indicated by solid purple. Default is 0.00 to
4.00 stops.
C O PYR I G HT © 2 0 1 7 R ED.C O M , I NC 9 5 5 - 0 1 2 7 _V 6 .3 , R EV - M | 7 5
RED RAVEN OPERATION GUIDE