RED RAVEN RED DRAGON 4.5K, Руководство по эксплуатации

Страница: 46 / 230

VIDEO MONITOR OUTPUTS
NOTE: HD- SDI and HDMI
®
ports are only available on select DSMC2 expanders. For more information, go to
"Input/Output Connectors" on page 193 .
The monitoring path converts RAW sensor data to a white balanced 12-bit depth 1920 x 1080 pixel RGB 4:4:4 video
signal. The signal may be modified using ISO, White Balance, or other RGB color space adjustments. The signal is
then scaled and gamma-corrected to provide monitor outputs at 10-bit depth in 4:2:2 YCC or 8-bit depth in 4:4:4
RGB.
The camera offers the following monitor outputs:
EVF/LCD : Supports a RED EVF or LCD display.
HD-SDI : Provides a 720p or 1080p output suitable for monitoring or recording to an external VTR or DDR device. It
may be configured for 10-bit LIN (VIDEO) or 10-bit LOG (FILM) encoded data.
HDMI : Provides a 480p, 720p, or 1080p output suitable for monitoring via a Windows
®
monitor or most HDTVs.
VIDEO MONITOR CATEGORIES
NOTE: HD- SDI and HDMI ports are only available on select DSMC2 expanders. For more information, go to
"Input/Output Connectors" on page 193 .
Video monitor outputs are separated into three (3) categories:
VIEWFINDER : The Upper Status Row, Live Action Area, and Lower Status Row display. Default output is the
EVF/LCD connector located on top of the camera. If an EVF or LCD is not connected, you can transfer the
VIEWFINDER output to either the HDMI or 3G-SDI (HD-SDI) output from an expander.
PROGRAM/Clean : None of the graphic overlays display.
PREVIEW : The Live Action Area and associated graphic overlays display.
For more information about changing the video monitor category of your monitor, go to "Monitor Control" on page 76 .
C O PYR I G HT © 2 0 1 7 R ED.C O M , I NC 9 5 5 - 0 1 2 7 _V 6 .3 , R EV - M | 4 6
RED RAVEN OPERATION GUIDE