RED RAVEN RED DRAGON 4.5K, Руководство по эксплуатации

Страница: 120 / 230

CALIBRATE SENSOR: MANUAL CAPTURE
The camera offers two (2) ways to calibrate the sensor: Manual Capture and Auto Capture. This section describes how
to calibrate the sensor with Manual Capture. For more information on Auto Capture, go to
"Calibrate Sensor: Auto
Capture" on the next page .
When you start a Manual Capture, the camera calibrates the sensor at the current exposure and temperature setting.
You will need to re-calibrate the sensor after extreme changes in exposure and temperature. The Manual Capture
process takes several minutes.
To perform a Manual Capture, follow the instructions below:
1. Ensure that the camera reaches the temperature you want to use for your shoot.
2. Set the exposure to the exposure you want to use for your shoot.
3. Ensure that the sensor is as dark as possible.
Preferably, take off the lens, and install the front body cap.
If you cannot take off the lens, put a lens cap on the lens. (Not all lens caps completely block IR. Lens caps are
made to protect the lens, not necessarily to block light.)
If possible, use a dark room.
Just closing the aperture is NOT sufficient.
4. Go to Menu > Settings > Maintenance > Calibrate > Create > Manual .
5. Select how many calibration maps you want to create from the Number of captures drop-down menu. You can
create up to four (4) calibration maps at a time.
6. Select the exposure you want for each calibration map from the Capture drop-down menus.
7. Select
Start Capture(s) .
8. Select
OK to continue. The system initializes and then makes multiple passes through the following phases of the
calibration:
Capturing
Analyzing
Erasing
Programming
9. When the Calibration Successful dialog displays, select OK to complete black shading.
The new calibration map is automatically selected.
C O PYR I G HT © 2 0 1 7 R ED.C O M , I NC 9 5 5 - 0 1 2 7 _V 6 .3 , R EV - M | 1 2 0
RED RAVEN OPERATION GUIDE