Red Hat NETWORK SATELLITE 5.1.1 - RELEASE NOTES, Справочное руководство

Страница: 99 / 268

System Groups —
87
6.4.2.9.5.4.2. System Details � Events � History
The default display of the
Events
tab lists the type and status of events that have failed, occurred or
are occurring. To view details of an event, click its summary in the
System History
list. To again view
the table, click
Return to history list
at the bottom of the page.
6.4.3. System Groups —
The
System Groups
page allows all RHN Management and Provisioning users to view the
System
Groups
list. Only System Group Administrators and Satellite Administrators may perform the following
additional tasks:
1. Create system groups. (Refer to
Section 6.4.3.1, “Creating Groups”
.)
2. Add systems to system groups. (Refer to
Section 6.4.3.2, “Adding and Removing Systems in
Groups”
.)
3. Remove systems from system groups. (Refer to
Section 6.4.2.9, “System Details”
.)
4. Assign system group permissions to users. (Refer to
Section 6.9, “Users —
”
.)
The
System Groups
list displays all of your system groups.
The
System Groups
list contains several columns for each group:
•
Select
— These checkboxes enable you to add systems in groups to the
System Set Manager
.
To select groups, mark the appropriate checkboxes and click the
Update
button below the
column. All systems in the selected groups are added to the
System Set Manager
. You can
then use the
System Set Manager
to perform actions on them simultaneously. It is possible
to select only those systems that are members of all of the selected groups, excluding those
systems that belong only to one or some of the selected groups. To do so, select them and
click the
Work with Intersection
button. To add all systems in all selected groups, select
them and click the
Work with Union
button. Each system will show up once, regardless of
the number of groups to which it belongs. Refer to
Section 6.4.4, “System Set Manager —
”
for details.
•
Updates
— Shows which type of Errata Alerts are applicable to the group or confirms
that it is up-to-date. Clicking on a group's status icon takes you to the
Errata
tab of
its
System Group Details
page. Refer to
Section 6.4.3.3, “System Group Details —
”
for more information.
The status icons call for differing degrees of attention:
•
— All systems within group are up-to-date