Red Hat NETWORK SATELLITE 5.1.1 - RELEASE NOTES, Справочное руководство, Страница: 226 / 268

Appendix C. Probes
214
• Inodes — The percentage of inodes currently in use.
An inode is a data structure that holds information about files in a Linux file system. There is an inode
for each file, and a file is uniquely identified by the file system on which it resides and its inode number
on that system.
Requirements
— The Red Hat Network Monitoring Daemon (
rhnmd
) must be running on the
monitored system to execute this probe.
Field Value
File system* /
Timeout* 15
Critical Maximum Inodes Percent Used
Warning Maximum Inodes Percent Used
Table C.18. Linux::Inodes settings
C.5.5. Linux::Interface Traffic
The Linux::Interface Traffic probe measures the amount of traffic into and out of the specified interface
(such as eth0) and collects the following metrics:
• Input Rate — The traffic in bytes per second going into the specified interface.
• Output Rate — The traffic in bytes per second going out of the specified interface.
Requirements
— The Red Hat Network Monitoring Daemon (
rhnmd
) must be running on the
monitored system to execute this probe.
Field Value
Interface*
Timeout*
30
Critical Maximum Input Rate
Warning Maximum Input Rate
Warning Minimum Input Rate
Critical Minimum Input Rate
Critical Maximum Output Rate
Warning Maximum Output Rate
Warning Minimum Output Rate
Critical Minimum Output Rate
Table C.19. Linux::Interface Traffic settings
C.5.6. Linux::Load
The Linux::Load probe monitors the CPU of a system and collects the following metric:
• Load — The average load on the system CPU over various periods.
Requirements
— The Red Hat Network Monitoring Daemon (
rhnmd
) must be running on the
monitored system to execute this probe.