Red Hat NETWORK SATELLITE 5.1.1 - RELEASE NOTES, Справочное руководство

Страница: 108 / 268

Chapter 6. Red Hat Network Website
96
6.4.4.12.2. System Set Manager � Misc � Custom System Information —
Click
Set a custom value for selected systems
followed by the name of a key to allow you to
provide values for all selected systems. Enter the information and click the
Set Values
button. Click
Remove a custom value from selected systems
followed by the name of a key to allow you to
remove values for all selected systems. Click the
Remove Values
button to finalize the deletion.
6.4.4.12.3. System Set Manager � Misc � Reboot Systems —
Select the appropriate systems and click the
Reboot Systems
link to set those systems for reboot.
To immediately cancel this action, click the
list of systems
link that appears within the confirmation
message at the top of the page, select the systems, and click
Unschedule Action
.
6.4.4.12.4. System Set Manager � Misc � Lock Systems —
Select the appropriate systems and click the
Lock Systems
link to prevent the scheduling of any
action through RHN that affects the selected systems. This can be reversed by clicking the
Unlock
Systems
link.
6.4.4.12.5. System Set Manager � Misc � Delete Systems —
Click
Delete System Profiles
, then click the
Confirm Deletions
button to remove the selected
profiles permanently.
6.4.4.12.6. System Set Manager � Misc � Add or Remove Add-On Entitlements
—
Select, via the radio button, whether to
Add
,
Remove
, or make
No Change
in the entitlements of the
selected systems. Click the
Change Entitlements
button to confirm your selection.
6.4.4.12.7. System Set Manager � Misc � System Preferences —
Toggle the
Yes
and
No
radio buttons and click the
Change Preferences
button to alter your
notification preferences for the selected systems. You may apply these preferences to individual
systems through the
Properties
subtab of the
System Details
page. Refer to
Section 6.4.2.9.1.2,
“System Details � Details � Properties”
for instructions.
•
Receive Notifications of Updates/Errata
— This setting keeps you abreast of all advisories
pertaining to your systems. Any time an update is produced and released for a system under your
supervision, a notification is sent via email.