Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION Скачать руководство пользователя страница 437

Страница: 437 / 848

PAM and LDAP

411

Install the Necessary LDAP Packages.

First, make sure that the appropriate packages are installed on both the LDAP server and the LDAP
client machines. The LDAP server needs the

openldap-servers

package.

The

openldap

openldap-clients

, and

nss_ldap

packages need to be installed on all LDAP

client machines.

Edit the Configuration Files.

• On the server, edit the

/etc/openldap/slapd.conf

file on the LDAP server to make sure it

matches the specifics of the organization. Refer to

Section 25.6.1, “Editing

/etc/openldap/

slapd.conf

”

for instructions about editing

slapd.conf

• On the client machines, both

/etc/ldap.conf

and

/etc/openldap/ldap.conf

need to

contain the proper server and search base information for the organization.

To do this, run the graphical

Authentication Configuration Tool

(

system-config-

authentication

) and select

Enable LDAP Support

under the

User Information

tab.

It is also possible to edit these files by hand.

• On the client machines, the

/etc/nsswitch.conf

must be edited to use LDAP.

To do this, run the

Authentication Configuration Tool

(

system-config-authentication

) and

select

Enable LDAP Support

under the

User Information

tab.

If editing

/etc/nsswitch.conf

by hand, add

ldap

to the appropriate lines.

For example:

passwd: files ldap
shadow: files ldap
group: files ldap

25.7.1. PAM and LDAP

To have standard PAM-enabled applications use LDAP for authentication, run the

Authentication

Configuration Tool

(

system-config-authentication

) and select

Enable LDAP Support

under the the

Authentication

tab. For more about configuring PAM, refer to

Section 43.4, “Pluggable

Authentication Modules (PAM)”

and the PAM man pages.

25.7.2. Migrating Old Authentication Information to LDAP Format

The

/usr/share/openldap/migration/

directory contains a set of shell and Perl scripts for

migrating authentication information into an LDAP format.

Note

Perl must be installed on the system to use these scripts.

Содержание ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION

















































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION

Бренды по названию

Популярные бренды

Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION, Руководство по развертыванию

Результаты поиска

Содержание ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION

Бренды по названию

Популярные бренды