Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION, Руководство по развертыванию

Страница: 400 / 848

Chapter 23. FTP
374
The default value is
NO
. Note, in Red Hat Enterprise Linux, the value is set to
YES
.
•
connect_timeout
— Specifies the maximum amount of time a client using active mode has to
respond to a data connection, in seconds.
The default value is
60
.
•
data_connection_timeout
— Specifies maximum amount of time data transfers are allowed to
stall, in seconds. Once triggered, the connection to the remote client is closed.
The default value is
300
.
•
ftp_data_port
— Specifies the port used for active data connections when
connect_from_port_20
is set to
YES
.
The default value is
20
.
•
idle_session_timeout
— Specifies the maximum amount of time between commands from a
remote client. Once triggered, the connection to the remote client is closed.
The default value is
300
.
•
listen_address
— Specifies the IP address on which
vsftpd
listens for network connections.
There is no default value for this directive.
Tip
If running multiple copies of
vsftpd
serving different IP addresses, the configuration
file for each copy of the
vsftpd
daemon must have a different value for this directive.
Refer to
Section 23.4.1, “Starting Multiple Copies of
vsftpd
”
for more information
about multihomed FTP servers.
•
listen_address6
— Specifies the IPv6 address on which
vsftpd
listens for network
connections when
listen_ipv6
is set to
YES
.
There is no default value for this directive.
Tip
If running multiple copies of
vsftpd
serving different IP addresses, the configuration
file for each copy of the
vsftpd
daemon must have a different value for this directive.
Refer to
Section 23.4.1, “Starting Multiple Copies of
vsftpd
”
for more information
about multihomed FTP servers.
•
listen_port
— Specifies the port on which
vsftpd
listens for network connections.
The default value is
21
.
•
local_max_rate
— Specifies the maximum rate data is transferred for local users logged into the
server in bytes per second.