Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION Скачать руководство пользователя страница 394

Страница: 394 / 848

Chapter 23. FTP

368

Modules (PAM)”

for more information. If session logging is not necessary, disabling this option

allows

vsftpd

to run with less processes and lower privileges.

The default value is

YES

23.5.2. Log In Options and Access Controls

The following is a list of directives which control the login behavior and access control mechanisms.

•

anonymous_enable

— When enabled, anonymous users are allowed to log in. The usernames

anonymous

and

ftp

are accepted.

The default value is

YES

Refer to

Section 23.5.3, “Anonymous User Options”

for a list of directives affecting anonymous

users.

•

banned_email_file

— If the

deny_email_enable

directive is set to

YES

, this directive

specifies the file containing a list of anonymous email passwords which are not permitted access to
the server.

The default value is

/etc/vsftpd.banned_emails

•

banner_file

— Specifies the file containing text displayed when a connection is established to

the server. This option overrides any text specified in the

ftpd_banner

directive.

There is no default value for this directive.

•

cmds_allowed

— Specifies a comma-delimited list of FTP commands allowed by the server. All

other commands are rejected.

There is no default value for this directive.

•

deny_email_enable

— When enabled, any anonymous user utilizing email passwords specified

in the

/etc/vsftpd.banned_emails

are denied access to the server. The name of the file

referenced by this directive can be specified using the

banned_email_file

directive.

The default value is

•

ftpd_banner

— When enabled, the string specified within this directive is displayed when a

connection is established to the server. This option can be overridden by the

banner_file

directive.

By default

vsftpd

displays its standard banner.

•

local_enable

— When enabled, local users are allowed to log into the system.

The default value is

YES

Refer to

Section 23.5.4, “Local User Options”

for a list of directives affecting local users.

•

pam_service_name

— Specifies the PAM service name for

vsftpd

The default value is

ftp

. Note, in Red Hat Enterprise Linux, the value is set to

vsftpd

• The default value is

. Note, in Red Hat Enterprise Linux, the value is set to

YES

Содержание ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION

















































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION

Бренды по названию

Популярные бренды

Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION, Руководство по развертыванию

Результаты поиска

Содержание ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION

Бренды по названию

Популярные бренды