Recognition Systems HandPunch 1000, Руководство пользователя

Страница: 42 / 70

Programming the HandPunch
Page 40
Preparation Here are a few guidelines to help you prepare for an enrollment session.
• You can enroll one person or a group of people during an enrollment
session.
• Each user must have a unique personal identification (ID) number. It will
save you considerable time if you assign the ID numbers in advance.
• The HandPunch will not accept two people with the same ID number.
• If you enroll people using the last four digits of their phone numbers or
social security numbers, you may get duplicate numbers.
• If you are enrolling large groups of people you may consider using an
enrollment trainer. It is a replica of a platen that is available through your
Recognition Systems reseller.
User
Education The HandPunch is easy to use and non-threatening. However, most people have
never used a biometric HandPunch. Training users on how the HandPunch
works and how to use it will eliminate most fears and concerns before they
occur. Inform the users of these facts.
• The HandPunch reads the shape of the hand, not the fingerprints or
palmprints.
• It does not identify people. It confirms people’s identity.
• It scans with an invisible light of the type used in TV remote controls.
• It does not transfer germs any more than a doorknob or money.
• It does not invade privacy; it guarantees it.
• The enrollment process requires three or more reads to collect enough
information to create a template.
Proper Hand
Placement For correct, consistent hand reads it is very important that your hand is placed
on the platen in the same manner every time. The following rules apply for
proper hand placement on the platen also refer to Figure 8-2 bellow.
• If you are wearing a ring, rotate the ring so the stone faces up in its normal
position.
• Slide your right hand onto the platen rather like an airplane landing at the
airport.
• Slide your hand forward until the web between your index and middle finger
stops against the Web Pin.
• Keep your hand flat. You should feel the surface of the platen on your palm
and the underside of your fingers.
• Close your fingers together until they touch the Finger Pins and watch the
hand diagram light display on the top panel.
• The lights go out when you have properly placed your fingers. If a light
remains on, a finger is not in proper contact with its Finger Pin.