Recognition Systems HandPunch 1000, Руководство пользователя

Страница: 66 / 70

Appendix D - Troubleshooting Guide
Page 64
This is called a “lockout.” Before the rejected ID number can be used again,
another employee or a supervisor must successfully verify at the Hand-
Punch.
• If you enter your ID number, but do not place your hand on the platen, the
HandPunch will time-out in about 25 seconds. You can immediately end this
time-out by pressing the key.
Beeper and LED Status During Verification
The HandPunch’s beeper and LED status display also display hand verification
information. This information is defined in Table 19.
CLEAR
Table 12: Beeper and LED Status During Verification
Operation Beeps LED Meaning
During Keypad
Entry 1 per Keystroke – Keystroke
Accepted
After ID Entry – – OK - Proceed
After ID Entry 2 – ID Number Not in
Database
After Hand Place-
ment 1 Green ID Verified
After Hand Place-
ment 2 Red ID Not Verified -
Try Again
After Hand Place-
ment 1 Long
Continuous Red ID Refused