Recognition Systems HandPunch 1000, Руководство пользователя

Страница: 35 / 70

HandPunch 1000 Manual
Page 33
Calibrate The Calibrate command displays the HandPunch’s exposure values, allowing
you to verify these values are within normal operating parameters. The standard
operating parameters are shown in Table 5.
Status Display The status display command allow you to enable or disable the displaying of the
following information.
• the status values of HandPunch inputs and outputs
• the hand read score of the last user to verify on the system
When the status display is enabled, Figure 8-1 identifies each status display field
value.
Figure 8-1 Status Display Chart
Table 5: Normal Operating Parameters
Parameter Normal Range
Row “r” 0 +/- 2
Column “c” 0 +/- 2
Exposure “e” 100 +/- 20
Last Hand Read Score
Aux Out 2
Aux Out 1
* Aux Out 0
* Lock
Aux In 2
Request to Exit
Aux In 1
Door Monitor Switch
Tamper
* These status values are inactive if the
reader is in Card Reader Output Mode.
O = Circuit Open H = Output is OFF (High)
C = Circuit Closed L = Output is ON (Low)
O C O C O H L H L NN
- ENTER ID -
O C O C O H L H L NN
These Input/Output
values do not apply to
the HandPunch 1000