Reason MaschineRMikroMK3, Руководство по началу работы

Страница: 13 / 50

2. Overview
The MaschineR application was designed to adapt the hardware controls to the selected device in the Reason sequencer. In
particular, the 16 pads will change layout based on whether you are controlling Kong, Redrum, Dr.Octorex or a synth. Here is a
general overview of the controls which will be described in more details in the following chapters.
www.retouchcontrol.com Maschine R - Getting Started Guide 13
1. Pad Modes: the layout of the 16 pads will change based on
the device controlled. The various layouts are describe in the
“
Controlling Devices ” chapter.
2. Virtual Display Modes: there are 5 modes to control
device parameters, the mixer, the transport, keyboard
settings, and song navigation. These are described in the
“
Controlling the Sequencer ”, “ Controlling Devices ”,
“ Controlling the Mixer ” and “ Song Navigation ” chapters.
3. Transport Controls: general transport controls for the
Reason sequencer. Additional functions can be accessed with
the “Native” button. These are described in the “
Controlling
the Sequencer ” chapter.
4. Data Wheel Modes: the data wheel has several functions,
from adjusting device parameters, to moving the playhead,
selecting tracks, etc. These are described in the “
Using the
Data Wheel with the virtual LCD ”, “ Controlling the Sequencer ”,
“ Controlling Devices ”, and “ Controlling the Mixer ”.
5. TouchStrip Modes: the touch strip can be used as a Pitch
or Mod wheel, to adjust device and mixer parameters, and to
see note repeat rates. See the “
Using the Touchstrip ” chapter
for the details.
6. Navigation Controls: the 3 buttons are used to switch
screen views in Reason (see next page).
Other Controls: there are several other controls for Note
Repeat, Chords, Fixed Velocity, and several others. These are
described in the “
Other Controls ” chapter.
1
3
4
5
6
2
Native button used as “shift”
Open/close the virtual display
Open/close the Reason browser