INSTALLATION INSTRUCTIONS
11
Intake pipe connection to appliance
Flexi flue is provided for air intake. A maximum of 2 x
7m lengths can be used.
Cut tube to length where required.
Ensure ends are burr free and round, test fit flue will
slide over connection.
Recommended Silicon
– Non-acetic, neutral cure
150°C or higher temperature rated.
Bostik RTV 926 or similar.
Apply an 8mm thick silicon bead fully around heater
connection approx. 10mm from the top.
Apply an 8mm silicon bead fully around the inside of
the flue end (heater connection end)
Fit flue clamp over flue (loosely).
