INSTALLATION INSTRUCTIONS
(continued)
Ensure ends are burr free and round, test fit flue will
slide over connection joiner.
25
Air intake pipe - Intake pipe connection to appliance
(continued)
Flexi flue is in 7m lengths. A maximum of 2 lengths
can be used.
Apply an 8mm silicon bead fully around the inside of
the flue end (heater connection end)
Fit flue clamp over flue (loosely).
Slide flue onto connection spigot fully.
Tighten clamp fully.
Wipe excess silicon, visually check connection to
ensure connection is fully sealed.
Air intake pipe - Intake pipe joiner connection
