Real Carriage Door & Sliding Hardware Frankling Autoswing, Руководство по установке

Страница: 42 / 56

Main Selection Description Default Range
LOGIC> OPEN IN OTHER
DIRECT.
0 - Pull to open / 1= Push to open 0 0-1
LOGIC> SAFE 1 * Configuration of safety input terminal 72. Defaulted as Phot
Test (Obstruction)
1 1 & 5
LOGIC> SAFE 2 * Configuration of safety input terminal 74. Defaulted as BAR
(Safety Edge)
6 0-15
LOGIC> SAFE 3 * Configuration of safety input terminal 75. Defaulted as
SHADOW (Safety Loop)
15 0-15
LOGIC> IC 1 * Configuration of command input terminal 61. Defaulted as
Start E
0 0-6
LOGIC> IC 2 *
Configuration of command input terminal 62. Defaulted as
Ped (Partial open)
4 0-6
LOGIC> AUX 3 *
Configuration of auxiliary output terminals 26 & 27. Defaulted
as 2nd channel contacts
0 0-8
LOGIC> FIXED CODE
Rolling code deafeat. 0 = rolling code, 1 = fixed code 0 0-1
LOGIC> RADIO PROG Quick remote programming. 0=disabled / 1-=enabled 1 0-1
LOGIC> SERIAL MODE 0 = Slave unit / 1 = Master unit 0 0-1
LOGIC> ADDRESS
Unit’s network identification number 0 0-127
LOGIC> EXPI 1 * Configuration of Expansion board input 1. Defaulted as Start
command.
1 0-14
LOGIC> EXPI 2 * Configuration of Expansion board input 2. Defaulted as Start
command.
0 0-10
LOGIC> EXP0 1 * Configuration of Expansion board output 1. Defaulted as
Traffic light contol 9 0-9
LOGIC> EXPO 2 * Ignores the START input while counting down for automatic
closing 0=OFF / 1=ON 9 0-9
LOGIC> TRAFFIC LIGHT
PREFLASHING
Ignorse the START input during the closing cycle. O=OFF /
1=ON 0 0-1
LOGIC> TRAFFIC LIGHT RED
LAMP ALWAYS ON
Red light remains on when gate is closed. 0=0FF / 1=ON 0 0-1
RADIO> ADD START Learns transmitter button as START command - -
RADIO> ADD 2CH Learns transmitter button as 2nd channel - -
RADIO> ERASE 64 Erase complete memory - -
RADIO> COD RX Show receiver ID code - -
RADIO> WK W LINK. - -
38 PR
OGRAMMING MENU
3
7
PR
OGRAMMING MENU