Real Carriage Door & Sliding Hardware Edison Sliding Opener, Руководство по установке

Страница: 6 / 28

Page 6 Specifications
Real Carriage Door & Sliding Hardware Copyright 2020© all rights reserved
included in the packages. If anything is missing,
contact us. The actual content may vary depending
on the specific order.
Specifications
The Edison operator can run up to 25ft right out
of the box and can be programmed to operate
up to 30ft. The control board has a motor brake
function, meaning if the motor speed is exceeded,
the motor brake actively uses the brake resistor.
There are also terminals that allow you to hook up
to your home automation system. Force process
and positions are always known by the control
unit, and any changes (attempted break in) will be
recognized. Because of the learn mode (autoset),
the motor will learn the force required to move the
door. This means the operator will not run at full
strength (unless needed), but instead adapts to your
application. With this operator there is only one limit
switch that needs to be installed, and the motor
carriage is simply laid out and pre-installed on the
rails.
Note: For additional information please visit the
manufacturer’s (Sommer) manual
• Troubleshooting page 62
• Warranty information page 67
• Ceiling mounting and position page 24
Technical
Data
2060 pro+ 2080 pro+ 2110
pro+
Rated voltage 24V DC
Rated
frequency
60 Hz
Number of
programma-
ble remote
buttons
40
Duty cycle 40 %
Emission
value
according
to operating
environment
< 59 dBA – opener only
IP code NEMA1 IP21
Protection
class
class 2
Technical
Data
2060 pro+ 2080 pro+ 2110
pro+
Standard
door height
7’ and 8’ doors (< 2
750 mm)
Max. door
height with
extensions
24 ft. (up to 2 x 3.59 ft. 3 x 3.59
ft. 4 x 3.59 ft.) (7.10 m / up to 2 x
1096 mm 3 x 1096 mm 4 x 1096
mm)
Speed * 9.4 inch/
sec. (240
mm/s)
8.3 inch/
sec. (210
mm/s)
7.4
inch/
sec.
(120
mm/s)
Max. traction
and pressure
force
600 N
(0.75 HP)
800 N (1
HP)
1100
N (1.25
HP)
Max. current
consumption
**
1.0 A 1.3 A 1.5 A
Standby < 3 W
Channels
LED Radio channel Function
1 CH 1 Pulse Mode
2 CH 2 Partial
Opening
or lighting
function
3 CH 3 Defined OPEN
4 CH 4 Defined
CLOSED