Real Carriage Door & Sliding Hardware Edison Sliding Opener, Руководство по установке

Страница: 26 / 28

Page 26 Accessories
Real Carriage Door & Sliding Hardware Copyright 2020© all rights reserved
Outdoor Keypad
Keypad Activation
1. Press and hold the [M] button for about 8
seconds
• Both red and amber LED
lights will light up for about
2 seconds
Note: The lower amber light
will flash until the upper red
light comes on. The keypad is
not activated until the red LED
illuminates.
Programming Access Code
1. Press the [P] button
2. Press the first button of your
access code
3. Press the [P] button
4. Enter entire access code
5. Press the [P] button againt to complete
Programming the Keypad to the Opener
1. Press the radio button on the control board of
the motor carriage (this puts it in learn mode)
2. Enter access code immediately on keypad
Changing Access Code
1. Press [P] button
2. Enter existing access code
3. Press [P] button
4. Enter a new access code that uses the first
same first digit (longer is OK)
5. Press [P] to complete
Erase Access
1. Press [M] button
2. Press [P] button
3. Enter 9 digit reset code
4. Press [M] button
5. Press [P] button
6. The red and amber LED lights will illuminate for
2 seconds and all codes are cleared
Note: It is important to keep the reset code sticker
which includes the 9 digit reset code
• They keypad will transmit the first digit coide
from the original code to the opener
Deleting Radio Code
1. Press and hold learn button in opener until LED
flashes
2. Press the desired keypad button
3. This will delete the first digit from entry code
Wireless Wall Control
Please see instructions included with the two
button wall control station for specifications,
assembly and additional information.
1. Press radio button once
2. Press the desired transmitter button
• The LED blinks orange once
• The LED lights up red
3. Radio is now programmed
4. Repeat steps 1 and 2 to program additional
buttons