Page 15
Installation
Real Carriage Door & Sliding Hardware Copyright 2020© all rights reserved
chain holder of wire connector
4. Rotate back 90 degrees
Note:
Do not tighten the chain on wire connector.
Tightening the Chain
1.
Tighten the tensioner bolt with socket (1/2”)
until the washer hits the arrow (or triangle)
Note:
For chain isolator installs (part 2.1) please
watch video:
https://youtu.be/gZoR_yZjNsc
Ceiling Bracket
1.
To install the ceiling bracket (part 6) take the ¾”
L bracket and insert the bolts (part 7) through
the bracket where the hollowed-out notch is on
each side (this is what mounts it to the ceiling)
2. Note:
You may have additional ceiling brackets
depending on your application.
3. Place one side against the top of the rail, and
the other at the bottom facing each other
4.
Slide the pieces together so they interlock
5.
To tighten the bolts first hand tighten them and
then with a socket only 1-2 more revolutions
Important Notes:
• It is important to not overtighten
• Do not force the pieces together, they should
interlock easily. Make sure they are firmly
pressed against rail and the brackets are
aligned
• For applications where you must drop the
opener down from the ceiling we provide an
option for a secondary ceiling bracket for
additional support. If you need an additional
bracket please call to place an order
Attaching the Boomerang Arm
1. Locate the arm attachment location on the
motor carriage (this should be facing the
closing direction of the doors)
2. Insert boomerang arm and secure with
provided fasteners from the additional parts
box
For Ceiling Mount Applications
Содержание Edison Sliding Opener
Страница 1: ...Edison Sliding Opener Installation Manual...
