To install the propeller (7), remove the end of
the prop adapter.
Install the propeller onto the motor shaft.
Verify the propeller has been installed
properly. The part of the propeller closest to
the hub that facing the front of the plane
should be rounded. The flatter side should be
towards the back of the plane.
Another view of the propeller orientation.
Once the orientation has been set properly,
screw the end of the prop adapter back onto
the motor shaft and tighten.
*Note: If the propeller spins backwards, you
simply need to reverse two of the wires that
go between the speed controller and the
motor. Any two of the three wires can be
swapped.
© 2011/2012 Ready Made RC, LLC
