www.ReadyLIFT.com
-
Phone: (877) 759
-
9991
6
69
-
21300
-
IM
-
AA
ReadyLIFT recommends all steps and procedures described in these instructions be
performed while the vehicle is properly supported on a two post vehicle lift with safe-
ty jacks.
Otherwise, park vehicle on a clean flat surface and block the rear wheels for safety.
Engage the parking brake.
Disconnect the vehicle power source at the ground terminal on the battery.
Lock the steering wheel in the straight forward position with the column lock or steer-
ing wheel locking device.
Raise the front of the vehicle and support with safety jack stands at each frame rail
behind the lower control arms.
Remove the front wheels.
Using an appropriate jack, support the
knuckle.
Remove the
sway bar end link
from the
lower control arm.
Retain the factory mounting hardware.
NOTE: BE SURE TO REMOVE THE END LINK NUT
USING HAND TOOLS.
