www.ReadyLIFT.com
-
Phone: (877) 759
-
9991
11
69
-
21300
-
IM
-
AA
Install the lower strut coil perch. Ensure
the mark made in the previous step is
aligned in the factory orientation.
Install the seal head bump cap.
NOTE: USE CAUTION WHEN INSTALLING THE
BUMP CAP.
Install the factory bump stop and dust
boot.
Install the factory strut shaft spacer.
Compress the spring enough to install the
factory top hat. Being sure to keep the
strut body and upper spring isolator in the
factory location, rotate the factory top hat
180 degrees from the previously made
marks. This will orient the spring in its
original location to prevent the spring
from bowing. Install the factory strut
shock shaft nut. When tightening, make
sure the top of the strut shaft is fully seat-
ed into the top hat.
Torque the top strut hardware to
35 ft
-
lbs
.
