ReadyLift 69-21300, Руководство пользователя

Страница: 17 / 25

www.ReadyLIFT.com - Phone: (877) 759 - 9991
17 69 - 21300 - IM - AA
Install the provided upper control arm
dust cap. Ensure the “ R ” is facing to-
wards the outside of the vehicle.
Install the replacement upper control arms
using the factory mounting hardware.
Torque the factory nut to 120 ft - lbs .
Install upper ball joint to knuckle using
factory hardware.
Torque the factory hardware to 55 ft - lbs .
Using the factory bolt install the upper
control arm heat shield on the passenger
side.
Torque the factory hardware to 80 in - lbs .
Install the pinch bolt on the top u - joint.
Torque the factory hardware to 55 ft - lbs .
NOTE: ENSURE THE STEERING WHEEL DID NOT
ROTATE. IT IS VERY INPORTANT THE STEERING
SHAFT AND U - JOINT ARE INSTALLED IN THE
FACTORY ORIENTATION OR ELSE THERE IS A
HIGH POSSIBILITY TO DAMAGE THE CLOCK
SPRING.