RCA VRD120, Руководство пользователя

Страница: 76 / 88

74
Appendix: reference
Time counter not working or time counter
not working in search modes
• The time counter does not advance during unrecorded
portions of tape. When an unrecorded segment of tape
is encountered, the time counter will hold its count
until recorded material is detected again.
• A minus (–) will appear in front of the time if you
rewind the tape farther back than a counter reading of
0:00:00.
• The time counter disappears during search; this is
normal.
Will not record or play
• Check to make sure there is a tape in the VCR.
• Try ejecting and reinserting the cassette.
• Check to make sure the tape is not broken.
• Check to make sure the VCR is not in pause mode. Press
PAUSE or PLAY to return to normal playback.
• Check the Child Lock feature.
Rewind does not operate
• Check to make sure the tape is not already rewound.
VCR P lus+ or timer recording not made or
wrong program recorded
• Check to make sure the correct PlusCode programming
number is entered.
• Check to make sure the program was entered correctly
(wrong channel or times).
• Power interruption. Reset the clock.
• Check to see if time and date are correct – including
AM/PM.
• Check to make sure the program did not exceed the
tape’s length or the tape was not rewound beforehand.
• Check to make sure the VCR was turned off at the time
recording was to start.
• Check to make sure there was a tape in the VCR and
the cassette’s safety tab was intact.
• VCR ejects cassette when the end of the tape is reached
during a timer recording.
• Check to make sure VCR Plus+ setup was completed
correctly.
Will not record
• Check to make sure the safety tab is intact.
• Check to make sure the VCR is not in the line mode.
Press INPUT on the remote.