RC Systems ViewSmart 1600+, Руководство по эксплуатации

Страница: 34 / 141

UM-1097
Revision B 24
Chapter 4 General Operating Instructions
4.1 Introduction
Swiping a magnetic wand past or pressing the
Menu
key, from any of the Data Display screens, displays
the Main Menu . In the Main Data Screen
Up, Down, Left and Right
keys maneuver the selection bar
between the channels and Edit selects the highlighted Channel to enter the Channel Configuration menus.
The
Up
and
Down
keys maneuver the selection bar up and down menu items and
Edit
selects the
highlighted item to enter the sub-menus. All items with a sub-menu are indicated by a right facing arrow
at the end of the line. To edit menu item values, swipe or press the
Edit
key, and use the
Up
and
Down
keys to edit the value. Once the desired value is entered, swipe the Edit key again to save the value. Swipe
the
Next
key to reverse out of a sub-menu.
Important : Some values require a Technician Sequence to be entered to change their values. This is to
prevent the operator from inadvertently changing the values. When prompted to “Enter technician
sequence:” simply swipe the
Up key four times to unlock the value for editing.
All system and channel configuration menu items are also editable from the embedded webpage (Chapter
4.5).
4.2 Security Menu
A password entered in the Security Menu allows locking all menus. Viewing menus is not denied, however,
attempts to edit variables flashes the
Locked message on the LCD.
Main Menu
Channel Config
Communication Settings
Security: Unlocked
System
Diagnostics
Alarm Outputs
~
~
~
~
~
~
Lock Code
Modbus/Web Code
Web User
Web Paswd
User Name
1234
admin
controller64
Default User
Security: Unlocked
Figure 17 Security Menu
4.2.1 User Name
Authorized individuals locking the system should first enter a name, phone number, or other contact
information into the 10 digit field so they can be contacted to unlock the unit at a later date.
!