RC Systems ViewSmart 1600+, Руководство по эксплуатации

Страница: 59 / 141

UM-1097
Revision B 49
H o s t n a me
A d d r e s s
N e t ma s k
Ga t e w a y
D H C P E n a b l e d
U n i t - 7 2 - 10 0 0
19 2 . 16 8 . 0 . 2
2 5 5 . 2 5 5 . 2 5 5 . 0
0 . 0 . 0 . 0
N o
N e t w o r k S e t t i n g s
Figure 38 Network Setting Menu
After making changes to the network settings menu a power cycle is required. Make sure to
exit the menu before cycling power so that the changes are saved.
4.5.4.6 Testing Connections
To verify that a ViewSmart 1600+ is accessible, bring up a command prompt. In windows, this can be found
by going to ‘start’ -> ‘run’. Then type ‘cmd’ and press ok. From the command prompt, type ping and then
the IP address of the unit. Verify that 4 reply lines are printed.
C:\>ping 192.168.0.2
Pinging 192.168.0.2 with 32 bytes of data:
Reply from 192.168.0.2: bytes=32 time<1ms TTL=128
Reply from 192.168.0.2: bytes=32 time<1ms TTL=128
Reply from 192.168.0.2: bytes=32 time<1ms TTL=128
Reply from 192.168.0.2: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
!