LIF200 User Manual
12
Enable
: LIF-200 will automatically send a Ping request to the peer every 30 seconds. The TCP
connection will be terminated if there is no response to the Ping from the peer
.
Max TCP Connection
: default
2
, range from 1 to 4.
Max TCP Connection allows multiple TCP connections to be accepted by the LIF-200 simultaneously. It
is usually used when users need to receive data from different hosts simultaneously. When multiple hosts
establish TCP connections to the LIF-200 at the same time, it will duplicate serial data and transmit it to
all hosts. When data comes in from the Ethernet port, it is sent out on a first-in-first-out basis to the serial
port.
TCP Client
Remote Connection Port Number
: default
3002
, range 0 to 65535.
Remote Host IP Address
: default
0.0.0.0
.
If your device is configured as active (to report real-time status to a remote, and data reception by the peer
needs to be guaranteed) then you can set the LIF-200 as TCP Client. Be sure the value „Remote
Connection Port Number‟ is set to the same value that your remote control application is using, and set
the correct value of „Remote Host IP Address‟.
TCP Connection
: default
Any Character
.
Start Up
means that the LIF-200 will attempt to establish a TCP connection as soon as it is powered up.
Any Character
means that the LIF-200 will attempt to establish a TCP connection as soon as it starts
receiving data from serial port.
